|
|||||||||||||||||||
|
|||||||||||||||||||
| KAITO KA33 SHORTWAVE + MW AMPLIFIED ACTIVE LOOP ANTENNA | |||||||||||||||||||
|
|
|||||||||||||||||||
|
The amazing Kaito KA33 dual function active loop shortwave antenna will dramatically improve the reception on the shortwave bands between 3.9 and 22 mHz when compared to the radios internal whip antenna and MW medium wave between 520-1710 when compared to the radios internal ferrite rod/bar antenna. For SHORTWAVE use, switch the antenna module to SW, connect the compact antenna with it's 15 foot antenna cable into the amplifier/preselector and the preselector's 18" cable directly into the 1/8" ANT jack of radios such as the KA1103 shown in one of the photograph. (KA1103 radio is not included with the antenna but is available in our other auctions) or to the radios external SW antenna connector with the included bare wire adapter. For MEDIUM WAVE
use, switch the antenna module to MW, connect the compact antenna with
it's 15 foot antenna cable into the amplifier/preselector and the
preselector's 18" cable directly into the MW ferrite inductive
coupler/adapter. Place the ferrite bar antenna adapter near the radios
internal ferrite rod / bar antenna such as for the KA1102 shown in one
of the photographs (The KA1102 radio is not included with the antenna
but is available separately). Usually this is in the top center of the
radio but placing the unit around this area will peak the signal when it
is placed in the best spot.
|
|||||||||||||||||||
|
Contact Radios4You Inc. for:
AM/FM
RADIOS
-
ANTENNAS
-
EMERGENCY RADIO/FLASHLIGHT
Copyright
© 2008 Radios4You
|
|||||||||||||||||||
|
|
|||||||||||||||||||